प्रिय दोस्तों।।।
मै काशिम टेक्निकल सपोर्ट इंजीनियर, अपने साइट में हार्दिक स्वागत करता हु।
मेरा पेज अगर अच्छा लगे तो तो इसे सब्सक्राइब और शेयर जरूर करे। धन्यवाद। ।
मै काशिम टेक्निकल सपोर्ट इंजीनियर, अपने साइट में हार्दिक स्वागत करता हु।
मेरा पेज अगर अच्छा लगे तो तो इसे सब्सक्राइब और शेयर जरूर करे। धन्यवाद। ।
Setup D-Link Router.....
Dlink DSL-2750U Login Instructions
This page shows you how to login to the Dlink DSL-2750U router.
Other Dlink DSL-2750U Guides
- Dlink DSL-2750U WiFi Instructions
- Change your Dlink DSL-2750U IP Address
- Setup DNS for your Dlink DSL-2750U
- Download Manuals for Dlink DSL-2750U
- All Dlink DSL-2750U Screenshots.
Find Your Dlink DSL-2750U Router IP Address
We need to know the Internal IP Address of your Dlink DSL-2750U router before we can login to it.
| Dlink IP Addresses |
| 10.0.0.2 |
If you did not see your router's ip address in the list above. There are 2 additional ways that you can determine your router's IP address:
- You can either follow our How To Find Your Routers IP Address guide.
- Or you can use our free software called Router IP Address.
Now that you have your router's Internal IP Address we are ready to login to it.
Login to the Dlink DSL-2750U Router
The Dlink DSL-2750U has a web interface for configuration. You can use any web browser you like to login to the Dlink DSL-2750U. In this example we'll use Internet Explorer.
Enter Dlink DSL-2750U Internal IP Address
Put the Internal IP Address of your Dlink DSL-2750U in the Address Bar of your web browser. It looks like this:
Then press the Enter key on your keyboard. You should see a dialog box pop up asking your for your Dlink DSL-2750U username and password.
Dlink DSL-2750U Default Username and Password
You need to know the username and password to login to your Dlink DSL-2750U. All of the default usernames and passwords for the Dlink DSL-2750U are listed below.
| Dlink Usernames | Dlink Passwords |
| admin | admin |
Enter your username and password in the dialog box that pops up. It looks like this:
Dlink DSL-2750U Home Screen
You should now see the Dlink DSL-2750U Home Screen, which looks like this.
If you see this screen, then congratulations, you are now logged in to your Dlink DSL-2750U. You are now ready to follow one of our other guides.
Solutions To Dlink DSL-2750U Login Problems
If you can not get logged in to your router, here a few possible solutions you can try.
Dlink DSL-2750U Password Doesn't Work
You should try other Dlink passwords. We have a large list of Dlink Passwords that you can try located here. Perhaps your router's default password is different than what we have listed here.
Forgot Password to Dlink DSL-2750U Router
If your Internet Service Provider supplied you with your router then you might want to try giving them a call and see if they either know what your router's username and password are, or maybe they can reset it for you.
How to Reset the Dlink DSL-2750U Router To Default Settings
If you still can not get logged in then you are probably going to have to reset your router to its default settings. You may want to follow our guide called How To Reset your Router.
Other Dlink DSL-2750U Guides
Here are some of our other Dlink DSL-2750U info that you might be interested in.
WiFi Configuration and Security Settings of D Link DSL 2730 U WiFi Modem
WiFi configuration and security settings of this Modem. You can very easily configure the WiFi with associated security features through the web interface. Remember – You have to configure the Modem in PPPoE Mode (Always ON mode) to get Simultaneous internet connectivity in all your PCs Laptops and other Smart phones.
Connect the Modem with the Ethernet cable to your PC/Laptop and power ON it. Open your browser and type http://192.168.1.1 . Now Enter “admin” in username and password fields to enter the Modem configuration page. In the page Click the Wireless Menu. Select Enable Wireless. In the SSID field you can type anything to identify your network- The default SSID is “DLink”. You can change it to your Name or something like that. Select your country. Then Click the Save button.
Now go to the Security Menu
In this page you can Enable and configure the WiFi Security. Let the WPS inDisabled Mode. Select your SSID. Set the Network Authentication – WPA-Personal –Auto.
in WPA/WAPI Passphrase field enter a non guessable complex strong password- This is the password of your Wireless network. You have to enter the same in your WiFi Devices for getting connectivity. Select the WPA/WAPI Encryption TKIP+AES or AES. Apply/Save your settings.
MAC Filter (Optional for added security)
MAC filter is an added security feature to safeguard your WiFi network from unauthorized intrusion.
MAC (Media Access Control) address is a unique number of each network hardware. This is actually the id of a machine . There will not be two network cards (Any type) with a same MAC address. It is a manufacture set hard coded one.
Through the MAC filtering, you can optionally allow or deny a specific WiFi device in your network. You need to enter the MAC address of the client machines in the Modem to permit or deny a specific machine. For instance– You have four laptops in a network and you want to enable MAC filtering. For this the MAC address of each machines to be typed in in the Modem for connectivity, means you have to save the addresses of all four machines in your Modem.
How to find MAC address
For Windows PC go to start > Run ant type cmd
Then type ipconfig/all and you will get some values as displayed.
Note down the physical address of WiFi adaptor – This is your MAC address.
Then type ipconfig/all and you will get some values as displayed.
Note down the physical address of WiFi adaptor – This is your MAC address.
Save your Settings and Reboot The Modem.
Now You can connect the Modem through the WiFi adaptors of your Laptop, PC or Smart Phones. While connecting it will ask the password which you have entered in the Modem.
No comments:
Post a Comment